Cone Spinner Propeller

Cone Spinner Propeller

Product Description

The Carbon Fiber Cone Spinner Propeller is a cutting-edge accessory designed for enhanced performance and efficiency in a variety of applications, including unmanned aerial vehicles (UAVs), marine crafts, and light aircraft. Engineered from high-grade carbon fiber composite materials, this propeller boasts a remarkable combination of strength, durability, and lightweight characteristics that make it an ideal choice for demanding scenarios where reliability and longevity are paramount.


In summary, the Carbon Fiber Cone Spinner Propeller represents a pinnacle of technology and innovation, offering users a high-performance propulsion solution that strikes the perfect balance between weight, strength, and efficiency. Whether you’re a hobbyist looking to push the limits of your drone’s capabilities or an engineer seeking to enhance the performance of a maritime vehicle, this propeller is designed to meet and exceed expectations.

Place of OriginGuangdong, China
Model NumberSFLT400YJS-3CF, SFLT450YJS-3CF
Private MoldYes
MaterialCarbon Fiber
Product NameSpinner
Size4”, 4.5”, 5”, 5.5”

Note: The values listed in the table are approximate and may vary depending on the specific product model and manufacturer. It is recommended to consult the product datasheet for accurate and detailed specifications.


  1. Drones (UAVs): For drones used in aerial photography, racing, or surveillance, the lightweight and efficient design of the carbon fiber cone spinner propeller can maximize flight time and maneuverability without sacrificing stability.

  2. Racing Boats: In high-speed marine applications like boat racing, these propellers can offer improved water flow dynamics, reducing drag and enhancing speed and agility.

  3. Light Aircraft: In the aviation sector, the propeller’s strength and balance can contribute to better fuel efficiency and performance, especially in smaller aircraft requiring lightweight yet reliable propulsion systems.

  4. Electric Air Taxi and Personal Flying Devices: As urban air mobility looks towards electric vertical takeoff and landing (eVTOL) vehicles, lightweight and efficient propellers like these will be crucial for optimal flight characteristics and battery economy.

  5. Remote Controlled Aircraft: Hobbyists and professionals involved in RC modeling can benefit from the high-performance aspects of the carbon fiber cone spinner propeller, allowing for greater speed and control in their models.

  6. Industrial and Commercial UAVs: For commercial applications such as package delivery or industrial inspections, these propellers provide the necessary durability and efficiency for extended operational life and reduced downtime.

  7. Research and Scientific Applications: In scientific research, whether it’s environmental monitoring or meteorological data collection, a lightweight and efficient propeller helps to extend the operational range and duration of the aircraft.

  8. Agriculture: Drones used in precision agriculture for crop monitoring or spraying require propellers that are both efficient and robust enough to handle the rugged environments often found in agricultural settings.

  9. Search and Rescue Operations: In search and rescue missions, the longevity and reliability offered by carbon fiber propellers can provide an extended operational window, which is critical for successful missions.

  10. Military and Defense: The military might use such propellers in unmanned reconnaissance aircraft or other small scale, highly mobile platforms requiring low weight and high performance.

Cone Spinner Propeller
Cone Spinner Propeller



 The use of carbon fiber reduces the weight of the propeller significantly when compared to traditional materials like aluminum or plastic. This makes it ideal for applications where every gram of weight affects performance, such as drones and small aircraft.

High Strength and Durability:

Carbon fiber is known for its high tensile strength and resilience. The propeller can withstand heavy loads and impacts without breaking or deforming, which is crucial for safety and longevity in aerial vehicles.

Aerodynamic Design:

The cone shape of the spinner helps to reduce drag, allowing the propeller to achieve higher speeds with less power input. It also results in improved flight efficiency and reduced battery consumption, particularly important for electric-powered UAVs.

Cone Spinner Propeller
Cone Spinner Propeller

Low Vibration and Noise:

Precision engineering ensures that the propeller is well-balanced, leading to smoother operation with less vibration and noise. This is beneficial for both the lifespan of the motor and the overall flying experience, especially in stealth operations or sound-sensitive environments.

Corrosion Resistance:

 Carbon fiber is not susceptible to corrosion in the same way that metals can be, making these propellers ideal for marine applications or any environment where exposure to moisture and salt is common.


Thanks to its durability and resistance to environmental factors, a carbon fiber propeller can last longer than those made from less robust materials, reducing the need for frequent replacements and lowering maintenance costs.

Improved Safety:

In the event of a collision or an unplanned landing, the propeller’s toughness helps to prevent fragmentation, which could cause additional damage or harm.


The propeller’s design allows for easy integration with a wide range of motor sizes and types, making it adaptable to various aircraft designs.


Depending on specific needs, the propeller can often be ordered in different sizes, pitches, and even cone angles to suit a particular application or preference.

Our Advantages

Mold Warehouse

Complete set of tooling

Our carbon fiber products are manufactured using a variety of molds to ensure precision and consistency in the final product. We have multiple sets of molds designed to accommodate different shapes, sizes, and specifications of carbon fiber components.

High production capacity

Our carbon fiber products are manufactured with high production capacity, ensuring efficient and cost-effective mass production. We have invested in advanced equipment and technology to streamline the production process and maximize output.

Moulding Machine
CNC Factory

High product precision

Our carbon fiber components are designed and engineered to meet the exacting requirements of various industries and applications. We utilize computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies to ensure precise measurements and cuts during the production process.

Catering to various customized processing needs

Our carbon fiber products are versatile and can cater to a wide range of customized processing needs. Whether it is for aerospace, automotive, sports equipment, or any other industry, our carbon fiber can be tailored to meet specific requirements.

Carbon Fiber Sheet


Test Equipment

Testing Equipment

Our company is equipped with various testing equipment to perform strength and performance tests on fiberglass and carbon fiber products of various sizes. This ensures consistent product quality and enhances overall reliability.

tstar test report CFRP
tstar test report FRP


  1. Are you a retail seller? No, we are a factory and only accept bulk orders. Our minimum order quantity (MOQ) is 1000 pieces.

  2. What payment methods do you accept? We accept payment via T/T (Telegraphic Transfer) and LC (Letter of Credit).

  3. Can all products be customized? Yes, we offer customization options for all our products. You can specify your requirements, such as dimensions, colors, and other specifications, and we will tailor the products accordingly.

  4. Can I get samples before placing a bulk order? Certainly! We provide samples, and you can request up to 10 pieces for evaluation purposes. Please note that samples may incur a nominal fee.

  5. What are the available shipping methods? We offer various shipping options to accommodate your needs. You can choose between sea freight, express delivery, rail transportation, or air freight.

  6. What is your monthly production capacity? Our average monthly production capacity is 1 million meters. However, this may vary depending on the specific product and customization requirements.

  7. Do I need to pay a deposit before production starts? Yes, a deposit is required before we commence production. Once we receive the deposit, we will initiate the manufacturing process.

Please feel free to reach out to our sales team for any further inquiries or specific requirements. We are here to assist you and provide the best solutions for your bulk order needs.


we provide the following services:

  • OEM /ODM service and support
  • Free promotion material if needed
  • Clients service one-to-one
  • Effective communication within 24 hours
  • New design and style collection updating for customer

Send Us A Message



Table of Contents

You may also like

Watch Band

Watch Band

Product Description Introducing the epitome of sophistication and strength: Our custom carbon fiber watch bands. Crafted with precision, these bands are designed for those who

Read More »
Lever Protector

Lever Protector

Lever Protector Product Description Introducing our custom carbon fiber lever protectors – the epitome of style and function for motorcycle enthusiasts. Crafted from high-grade carbon

Read More »
Fender Chain Guard

Fender Chain Guard

Product Description The “Carbon Fiber Fender Chain Guard for Honda” is a high-quality protective accessory designed specifically for motorcycles manufactured by Honda. This guard serves

Read More »

Leave Us a Message