Pultruted fiberglass rod Farming Application plant supporting stake
Information of Fiberglass Tree Support Stakes
Product type | Fiberglass product |
Diameter & length | Customized |
Color | As you required |
Shape | Solid, round, square, tube, rectangular, triangular |
In order to offer you an accurate quotation, please provide the following information 1. Diameter & length 2. Color 3. Surface requirement. 4. Quantity If you have other requirement, please feel free to tell us at the same time. Tips Here is the dimension that widely used for supporting plants 1. Diameter from 3.0mm-5.5mm, length from 300mm-600mm, which are used for supporting flowers, especially in the Netherlands, which are famous for flowers. 2. Diameter from 6.0mm-8.0mm, length alway be 4”(=1220mm), 1500mm, 6”(=1830mm), which are widely used for supporting grapes, peppers. 3. Diameter from 8.0mm-12.0mm, length alway be 1500mm, 2000mm-2400mm, which are widely used for supporting tomatoes, peppers, and vine, etc. 4. OD*ID: 25*21mm, 28*24mm, 32*28mm, 35*30mm, 41*37mm, length 3000mm-3500mm, which are widely used for supporting trees, like apple trees. 5. Diameter 15mm and 16mm, and the flat bar are widely used in plant, too. 6. For the small diameter, the customer will require that one side should be taper, just like a pencil point. Also, we can send you some samples to do the testing for free if it is available. | |
- OEM /ODM service and support
- Free promotion material if needed
- Clients service one-to-one
- Effective communication within 24 hours
- New design and style collection updating for customer
Please leave us a message
Please Share It
Facebook
Twitter
LinkedIn
You may also like
Carbon Fiber Tube
Carbon Fiber Tube Buyer’s Guide: Round, Square & Custom
Ordering carbon fiber tubes seems simple — pick a diameter, a wall thickness, and a length. Then the questions start. Do you specify inner diameter
June 5, 2026 No Comments
Articles
How to Cut, Drill and Bond Carbon Fiber Tubes: Step Guide
Carbon fiber tubes deliver incredible stiffness-to-weight ratios — but they also present unique challenges when you need to cut them to length, drill mounting holes,
June 4, 2026 No Comments
Articles
Prepreg vs Wet Layup vs Filament Winding: Carbon Fiber Process Guide
Choosing the right carbon fiber manufacturing process is the single most consequential decision in any composite product development program. The process determines not just the
June 3, 2026 No Comments
