Fiberglass Duct Rod For Wire Cable Pulling
Information of Fiberglass Duct Rod
Pull-Braiding is our New Production Process ,It combining the advantages of pultrusion and roll-wrapping process ,the products made by pull-braiding have very good shear strength eaqual to the roll-warpping tube but the length of it can be unlimited as the pultrusion tube.
Technical Specification
Glass reinforced Composite Core:general properties
| Property | Value |
| Keinforcement | E-glass fiber |
| Glass content of inner part | 75-80% |
| Material of pulling rod | resin + fiberglass |
| Density | >1.9gr/cm3 |
| Diameter tolerance | +/-0.10mm |
| Work situation temperature | -40°C to +80°C |
Mechanical properties
| Property | Value |
| Minimum pullling strength | 4000 N+/-5% |
| Tensile modulus | >30000Mpa |
| Consistency of rod | 150gr/m +/-5% |
| Flexural modulus | >30000M pa |
| Elongation at break | 2.5-3% |
Polyethylene Cover
| Property | Value |
| Tensile strength | >15N/mm2 |
Environmental stress & crack resistance | >1000 hr. |
| Heat stability | OK. |
| Carbon black | OK. |
- OEM /ODM service and support
- Free promotion material if needed
- Clients service one-to-one
- Effective communication within 24 hours
- New design and style collection updating for customer
Please leave us a message
Please Share It
You may also like
Carbon Fiber Tube Buyer’s Guide: Round, Square & Custom
Ordering carbon fiber tubes seems simple — pick a diameter, a wall thickness, and a length. Then the questions start. Do you specify inner diameter
How to Cut, Drill and Bond Carbon Fiber Tubes: Step Guide
Carbon fiber tubes deliver incredible stiffness-to-weight ratios — but they also present unique challenges when you need to cut them to length, drill mounting holes,
Prepreg vs Wet Layup vs Filament Winding: Carbon Fiber Process Guide
Choosing the right carbon fiber manufacturing process is the single most consequential decision in any composite product development program. The process determines not just the
